Publications

M Rajaei, D-Y. Wang and D Bhattacharyya: Combined effects of ammonium polyphosphate and talc on the fire and mechanical properties of epoxy/glass fabric composites, Composites Part B: Engineering, Volume 113, (2017), 381-390.

S.T.C Lin, D Musson, S Amirapu, J Cornish and D Bhattacharyya: Development of organic solvent-free micro-/nano-porous polymer scaffolds for musculoskeletal regeneration; Journal of Biomedical Materials Research Part A.

O Das, N.K. Kim, A.K. Sarmah and D Bhattacharyya: Development of waste based biochar/wool hybrid biocomposites: Flammability characteristics and mechanical properties; Journal of Cleaner Production, Volume 144, (2017,) 79-89.

S Ikram, O Das and D Bhattacharyya: A parametric study of mechanical and flammability properties of

R Zhu, V Yadama, H Liu, R.J.T. Lin and D.P. Harper: Fabrication and Characterization of Nylon 6/Cellulose Nanofibrils Melt-spun Nanocomposite Filaments, Composites Part A: Applied Science and Manufacturing, In Press, Volume 97, (2017), 111–119. 

K Shahbaz, I.M. Al Nashef, R.J.T. Lin, M.A. Hashim, F.S. Mjalli and M.M. Farid: A Novel Calcium Chloride Hexahydrate-Based Deep Eutectic Solvent as a Phase Change Materials, Solar Energy Materials and Solar Cells, Volume 155, (2016), 147-154.

S.M. Panamoottil, R Das and K Jayaraman: Towards a multiscale model for flax composites from behaviour of fibre and fibre/polymer interface, Journal of Composite Materials, Volume 51, Issue 6, (2017).

A Banerjee, A Chanda and R Das: Historical origin and recent development on normal directional impact models for rigid body contact simulation: A critical review, Archives of Computational Methods in Engineering, Volume 24, Issue 2, (2017) 397–422.

M.H. Shojaeefard, R Talebitooti, M Amirpour, R. Ahmadi: Investigation Of Porous Material Effects On Automotive Intake System Using Statistical Energy Analysis, Journal Of Solid Mechanics In Engineering, Volume 2, (2010), 57-65.

A Banerjee, A Chanda and R Das: Seismic analysis of a curved bridge considering deck abutment pounding interaction, Earthquake Engineering and Structural Dynamics. Volume 46, Issue 2, (2017), 67–290.

S. Fakirov: Hydrogen storage and polymers, Express Polymer Letters, Volume 11, (2017), 162-162.

S Fakirov: Fundamentals of Polymer Science for Engineers, Wiley-VCH, Weinheim, 2017.

V.B. Mohan, K Jayaraman, M Stamm and D Bhattacharyya: Physical and chemical mechanisms affecting electrical conductivity in reduced graphene oxide films, Thin Solid Films, Volume 616, (2016) 172-182.

V.B. Mohan, D Liu, K Jayaraman, M Stamm and D Bhattacharyya: Improvements In Electronic Structure And Properties Of Graphene Derivatives, Volume 7, Issue 6 (2016) 421-429.

V.B. Mohan, K Jayaraman and D Bhattacharyya: Hybridization of graphene-reinforced two polymer nanocomposites. International Journal of Smart and Nano Materials, Volume 7, Issue 3, (2016), 179-201.

V.B. Mohan, K Jayaraman, M Stamm and D Bhattacharyya: Physical and chemical mechanisms affecting electrical conductivity in reduced graphene oxide films, Thin Solid Films, Volume 616, (2016), 172-182.

S Ikram, O Das and D Bhattacharyya: A parametric study of mechanical and flammability properties of biochar reinforced polypropylene composites; Composites Part A: Applied Science and Manufacturing, Volume 91, (2016), 177-188.

O Das, D Bhattacharyya, D Hui and K-T Lau: Mechanical and flammability characterisations of biochar/polypropylene biocomposites; Composites Part B: Engineering, Volume 106, (2016) 120-128.

D Jung , J Balamurugan, N.H. Kim, S.H Lee, D Bhattacharyya and J.H. Lee: Facile fabrication of highly durable Pt NPs/3D graphene hierarchical nanostructure for proton exchange membrane fuel cells,  Carbon, Volume 109, (2016), 805-812.

N.K. Kim and D Bhattacharyya: Development of fire resistant wool polymer composites: Mechanical performance and fire simulation with design perspectives, Materials and Design, Volume 106, (2016), 391-403.

O Das, D Bhattacharyya and A.K. Sarmah: Sustainable eco-composites obtained from waste derived biochar: a consideration in performance properties, production costs, and environmental impact, Journal of Cleaner Production, Volume 129, (2016), 159-168.

O Das, A.K. Sarmah and D Bhattacharyya: Nanoindentation assisted analysis of biochar added biocomposites, Composites Part B: Engineering, Volume 91 (2016) 219-227.

O Das, A.K. Sarmah, Z Zojuvick and D Bhattacharyya: Characterisation of waste derived biochar added biocomposites: Chemical and thermal modification, Science of the Total Environment, Volume 550, (2016) 133-142.

O Das, A.K. Sarmah, D Bhattacharyya: Biocomposites from waste derived biochars: Mechanical, thermal, chemical, and morphological properties, Waste Management, Volume 49 (2016) 560-570 (2016).

A.D.L Subasinghe, R Das and D Bhattacharyya: Parametric analysis of flammability performance of polypropylene/kenaf composites, Journal of Materials Science, Volume 51, Issue 4 (2016) 2101-2111.

Hexahydrate-Based Deep Eutectic Solvent as a Phase Change Materials, Solar Energy Materials and Solar Cells, Volume 155, (2016), 147-154.

N.Z.M. Zuhudi, K. Jayaraman and R.J.T. Lin: Mechanical, Thermal and Instrumented Impact Properties of Bamboo Fabric-Reinforced Polypropylene Composites, Polymers and Polymer Composites Volume 24, Issue 9, (2016), 755-765

N.Z.M. Zuhudi, R.J.T. Lin and K Jayaraman: Flammability, Thermal and Dynamic Mechanical Properties of Bamboo–Glass Hybrid Composites, Journal of Thermoplastic Composite Materials, Volume 2, Issue 9, (2016), 1210-1228.

S.M.R Kazmi, R Das and K Jayaraman: Single-step manufacturing of curved polypropylene composites using a unique sheet consolidation method, Journal of Materials Processing Technology, Volume 237, (2016), 96–112.

N Burbery, R Das, W.G Ferguson: Thermo-kinetic mechanisms for grain boundary structure multiplicity, thermal instability and defect interactions, Materials Chemistry and Physics, Volume 179, (2016), Pages 254–265

M Amirpour, R Das and E.I Flores: Analytical solutions for elastic deformation of functionally graded thick plates with in-plane stiffness variation using higher order shear deformation theory, Composites Part B, Volume 94, (2016), Pages 109–121

R Das and P.W. Cleary: Three-dimensional modelling of coupled flow dynamics, heat transfer and residual stress generation in arc welding processes using the mesh-free SPH method, Journal of Computational Science, Volume 16, (2016), 200-216.

A Banerjee, A Chanda and R Das: 2016. Oblique frictional unilateral contacts perceived in curved bridges, Nonlinear Dynamics, Volume 85, Issue 4, (2016), 2207–2231.

Y Chen, R Das and M Battley: Response of honeycombs subjected to in-plane shear, Journal of Applied Mechanics, Volume 83, Issue 6, (2016), 061004,

A Ahmadi, C Mathieson, G.C. Clifton, R Das, J.B.P. Lim: An experimental study on novel cold-formed steel connection for open channel trusses, Journal of Constructional Steel Research, Volume 122, (2016), 70–79.

N Burbery, R Das and W.G. Ferguson: Molecular dynamics study of the inter-relationships between grain boundary structure and the thermal, mechanical and energy properties, Acta Materialia, Volume 108, (2016), 355-366.

M Lagos, and R Das: Brittle and ductile character of amorphous solids, Advances in Applied Mathematics and Mechanics, Volume 8, Issue 3, (2016) 485-498.

J Nam, W.J. Cantwel, R Das, A Lowe, and S Kalyanasundaram: Deformation behaviour of steel/SRPP fibre metal laminate characterised by evolution of surface strains, Advances in Aircraft and Spacecraft Science, Volume 3, Issue 1, (2016), 61-75.

R Das and P.W. Cleary: Application of a mesh-free method to modelling brittle fracture and fragmentation of a concrete column during projectile impact, Computers and Concrete, Volume 16, Issue 6, (2016), 933-962.

A Subasinghe, R Das and D Bhattacharyya: Parametric analysis of flammability performance of polypropylene/kenaf composites, Journal of Materials Science, Volume 51, Issue 4, (2016), 2101-2111.

E.I. Flore, K Redlich, J Hinojosa, Y Chandra and R Das: Multi-scale modelling of rolling shear failure in cross-laminated timber structures by homogenisation and cohesive zone models, International Journal of Solids and Structures, Volume 81, (2016), 219–232.

D Sreenivasan, P.T. Tu, M Dickinson, M Watson, A BlaiS, R Das, J Cornish and J.W. Fernandez: Computer modelling integrated with micro CT and material testing provides additional insight to evaluate bone treatments: application to a beta-glycan derived whey protein mice model, Computers in Biology and Medicine, Volume 68, (2016), 9-20.

J.B.P. Lim, G.J Hancock, G.C Clifton, C.H. Pham and R Das: DSM for ultimate strength of bolted moment-connections between cold-formed steel channel members, Journal of Constructional Steel Research, Volume 117, (2016), 196-203.

H Teimoori, R.T. Faal and R Das: Saint-Venant torsion analysis of bars with rectangular cross section and effective coating layers, Advances in Applied Mathematics and Mechanics, Volume 37, Issue 2, (2016), 237-252.

N Burbery, R Das, W.G. Ferguson, G Po, and N Ghoniem: Atomistic activation energy criteria for multi-scale modelling of dislocation nucleation in FCC metals, International Journal of Computational Methods. Volume 13, Issue 4, (2016), 1641006-1

M Amirpour, R Das, E.I. Flores: Analytical solutions for elastic deformation of functionally graded thick plates with in-plane stiffness variation using higher order shear deformation theory, Journal of Composite part B, Volume 94, (2016), 109-121.

P Dwivedi, K.M. Karumbaiah, R Das: Nano-size polymers via precipitation of polymer solutions. Book Chapter in the Edited volume Nano-size Polymers: Preparation, Properties, Applications, ed. Stoyko Fakirov. Publisher: Springer, (2016), 251-282.

R Das, A Chanda, J Brechau and A Banerjee: Impact behaviour of fibre metal laminates. Book Chapter in the Edited volume Dynamic Deformation, Damage and Fracture in Composite Materials and Structures, ed. Vadim V. Silberschmidt. Publisher: Woodhead, Elsevier, (2016).

S Fakirov: From Polymer Blends to Nano-size Materials with Controlled Nanomorphology, in: Nano-size Polymers, S. Fakirov, (Ed.), Springer, Switzerland, 2016, 179-224.

S Fakirov: Nanofibrillar Single Polymer Composites: Preparation and Mechanical Properties, in: Nano-size Polymers, S. Fakirov, (Ed.), Springer, Switzerland, 2016, 343-366.

T Allen and M Battley: Estimation of transverse shear force during slamming impacts on a simply supported composite panel using a strain derivative method, Composite Structures, Volume 153, (2016), 42-49.

A Swidan, G Thomas, I Penesis, D Ranmuthugala, W Amin, T Allen and M Battley: Wetdeck slamming loads on a developed catamaran hullform – experimental investigation. Ships and Offshore Structures, Volume 12, Issue 5, (2016), 653-661.

Y Chen, R Das and M Battley: Response of Honeycombs Subjected to In-Plane Shear, Journal of Applied Mechanics, Volume 83, Issue (6), (2016), 061004.

A Swidan, G Thomas, D Ranmuthugala, W Amin, I Penesis, T Allen and M Battley: Experimental drop test investigation into wetdeck slamming loads on a generic catamaran hullform, Ocean Engineering, Volume 117, (2016), 143-153.

E Swery, S Allen, S Comas-Cardona, Q Govignon, C Hickey, J Timms, S Bickerton: Efficient experimental characterisation of the permeability of fibrous textiles, Journal of Composite Materials, Volume 50, Issue 28, (2016), 4023-4038.

T Allen and M Battley: Estimation of transverse shear force during slamming impacts on a simply supported composite panel using a strain derivative method, Composite Structures, Volume 153, (2016), 42-49.

E Swery, T Allen and P Kelly. Capturing the Influence of Geometric Variations on Permeability using a Numerical Permeability Prediction Tool, Journal of Reinforced Plastics and Composites, Volume 35, Issue 24, (2016), 1802-1813.

E Swery, T Allen and P Kelly: Automated tool to determine geometric measurements of woven textiles using digital image analysis techniques, Textile Research Journal, Volume 86, Issue 6, (2016) 618-635.

S.M.R Kazmi, K Jayaraman and R Das: Single-step manufacturing of curved polypropylene composites using a unique sheet consolidation method. Journal of Materials Processing Technology, Volume 237, (2016), 96-112.

W Wang, N Chouw and K Jayaraman: Effect of thickness on the impact resistance of flax fibre-reinforced polymer. Journal of Reinforced Plastics and Composites, Volume 35, Issue 17, (2016), 1277-1289.

M.R. Nurul Fazita, K Jayaraman and D Bhattacharyya: Formability Analysis of Bamboo Fabric Reinforced Poly (Lactic) Acid Composites, Materials, Volume 9, Issue 7, (2016), 539.

V.B. Mohan, K Jayaraman and D Bhattacharyya: Relevance of Adhesion in Particulate/Fibre-Polymer Composites and Particle Coated Fibre Yarns: A Critical Review, Reviews of Adhesion and Adhesives, Volume 4, Issue 2, (2016), 119-151.

V.B. Mohan, D Liu, K Jayaraman, M Stamm and D Bhattacharyya: Improvements In Electronic Structure And Properties Of Graphene Derivatives. Advanced Materials Letters, Volume 7, Issue 6, (2016), 421-429.

M.R. Nurul Fazita, K Jayaraman, D Bhattacharyya, M.K. Mohamad Haafiz, C Saurabh, M Hussin and H.P.S. Abdul Khalil: Green Composites Made of Bamboo Fabric and Poly (Lactic) Acid for Packaging Applications-A Review. Materials, Volume 9, Issue 6, (2016), 435.

N.Z.M. Zuhudi, K Jayaraman and R.J.T. Lin: Mechanical, Thermal and Instrumented Impact Properties of Bamboo Fabric-Reinforced Polypropylene Composites, Polymers and Polymer Composites, Volume 24, Issue 9, (2016), 755-765.

S Stanglmaier S, D Vukoje, S Bickerton, J Hodde, A Repper, B Thoma and F Henning: Analysis of the Flow Front Progression during the Injection of Locally Reinforced Carbon Fibre Textiles in the RTM-Process, Journal of Plastics Technology, Issue2, (2016) 31-62.

E Swery, T Allen, S Comas-Cardona, Q Govignon, C.M.D. Hickey, J Timms, L Tournier, W.A. Walbran., P.A. Kelly, S Bickerton, Efficient Experimental Characterization of the Permeability of Fibrous Textiles, Journal of Composite Materials, Volume 50, Issue 28, (2016), 4023-4038.

H Alhussein, R Umer, S Rao, E Swery, S Bickerton and W.J. Cantell: Characterization of 3D Woven Reinforcements for Liquid Composite Molding Processes, Journal of Materials Science, Volume 51, Issue 6, (2016), 3277-3288.

V.B. Mohan, R Brown, K Jayaraman and D Bhattacharyya: Characterisation of Reduced Graphene Oxide: Effects of Reduction Variables on Electrical Conductivity, Materials Science and Engineering: B, Volume 193, (2015), 49-60.

R Das, N Navaranjan, P Browne, G Riley and Nguyen, C: Finite element analysis of interfacial fracture in polyurethane foam–steel composites at micro-scale, International Journal of Applied Mechanics, Volume 7, Issue 6, (2015), 1550078-1-28.

R Das and A Chanda: Fabrication and Properties of Spin-Coated Polymer Films. Book Chapter in the edited volume Nano-size Polymers: Preparation, Properties, Applications, ed. Stoyko Fakirov. Publisher: Springer International Publishing. ISBN: 978-3-319-39715-3, (2015).

M. C. Shaw, R Das and A Chanda: Damage Tolerance, Reliability and fracture characteristics of multi-layered engineering composites, Book Chapter in the edited volume Reference Module in Materials Science and Materials Engineering, ed. Saleem Hashmi. Publisher: Elsevier. ISBN: 978-0-12-803581-8, (2015).

S Fakirov: Composite materials - is the use of proper definitions important?, Materials Today, Volume 18, (2015), 528 – 529.

S Fakirov: Is the use of correct terms and definitions important in creation of new materials?, Express Polymer Letters, Volume 9, (2015) 671 – 671.

L.D. Kimble, D Bhattacharyya, S Fakirov; Biodegradable microfibrillar polymer-polymer composites from poly(L-lactic acid)/poly(glycolic acid), Express Polymer Letters, Volume 9, (2015), 300 - 307.

S Fakirov (Ed.): Biodegradable polyesters, Wiley-VCH, Weinheim, 2015.

S Fakirov: (Ed.), Nano-size Polymers, Springer, Switzerland, 2016.

S Fakirov: Environment-Friendly Methods for Converting Biodegradable Polyesters into Nano-Size Materials, in: Biodegradable polyesters, S. Fakirov, (Ed.), Wiley-VCH, Weinheim, 2015, 215-234

S.N.S. Tan, A.A. Somashekar and D Bhattacharyya: Development and analysis of gas barrier properties of microfibrillar polymer–polymer composites, Journal of Materials Science, Volume 50, Issue 22, (2015), 7384-7397.

T Allen and M Battley: Quantification of hydroelasticity in water impacts of flexible composite hull panels, Ocean Engineering, Volume 100, (2015), 117-125.

M.R. Nurul Fazita, K Jayaraman, D Bhattacharyya, M Hussin, M.K. Haafiz and H.P.S. Abdul Khalil: Disposal Options of Bamboo Fabric-Reinforced Poly(Lactic) Acid Composites for Sustainable Packaging: Biodegradability and Recyclability, Polymers, Volume 7, Issue 8, (2015), 1476-1496.

S.M. Panamoottil, R Das and K Jayaraman: Anisotropic continuum damage model for prediction of failure in flax/polypropylene fabric composites, Polymer Composites, Volume 37, Issue 8, (2015).

V.B. Mohan, R Brown, K Jayaraman and D Bhattacharyya: Characterisation of reduced graphene oxide: Effects of reduction variables on electrical conductivity, Materials Science and Engineering: B, Volume 193, (2015), 49-60.

L Yan, N Chouw, and K Jayaraman: Effect of UV and water spraying on the mechanical properties of flax fabric reinforced polymer composites used for civil engineering applications, Materials and Design, Volume 71, (2015),17-25.

I Ali, K Jayaraman, and D Bhattacharyya: Dimensional stability improvement of kenaf panels by post- manufacturing hygrothermal treatments using response surface methodology, Industrial Crops and Products, Volume 67, (2015),422- 431.

P-J. Liotier, Q Govignon, E Swery, S Drapier and S Bickerton: Characterisation of Woven Flax Fibres Reinforcements: Effect of the Shear on the In-plane Permeability, Journal of Composite Materials Volume 49, Issue 27, (2015), 3415-3430.

A.T. Fabro, N.S. Ferguson, J.M. Gan, B.R. Mace and S Bickerton: Estimation of Random Field Material Properties for Chopped Fibre Composites and Application to Vibration Modelling, Composites Structures, Volume 125, (2015), 1-12.

W.A. Walbran, S Bickerton and P.A. Kelly: Simulation and Experimental Validation of Mould Tooling Forces in RTM and CRTM for Nonplanar Components, Polymer Composites Volume 36, Issue 4, (2015), 513-528.

M.R. Nurul Fazita, K Jayaraman, D Bhattacharyya, M.S. Hossain, M.K. Haafiz and K.H.P.S Abdul: Disposal Options of Bamboo Fabric-Reinforced Poly(Lactic) Acid Composites for Sustainable Packaging: Biodegradability and Recyclability, Polymers, Volume 7, Issue 8, (2015), 1476-1496.

N.K. Kim, R.J.T. Lin and D Bhattacharyya: Effects of wool fibres, ammonium polyphosphate and polymer viscosity on the flammability and mechanical performance of PP/wool composites, Polymer Degradation and Stability, Volume 119, (2015), 167-177.

A.D.L Subasinghe, R Das and D Bhattacharyya: Fiber dispersion during compounding/injection molding of PP/kenaf composites: Flammability and mechanical properties, Materials and Design, Volume 86, (2015), 500-507.

S.N.S Tan, A.A. Somashekar and D Bhattacharyya: Development and analysis of gas barrier properties of micro-fibrillar polymer-polymer composites, Journal of Materials Science, Volume 50, (2015), 7384–7397.

N Tran, X.W. Yuan, D Bhattacharyya, I Verpoest: Fibre-matrix interfacial adhesion and properties of flax composites, International Journal of Modern Physics B, Volume 29, Issue 11, (2015), 1540018.  

H Wu, L.F. Cheng, S.W. Fan, X.W. Yuan, D Bhattacharyya: The effects of pre-oxidation heating rate on bio-based carbon fibres and its surface repair, International Journal of Modern Physics B, Volume 29, Issue 11, (2015,) 1540019.

J Lee, D Bhattacharyya, M.Q. Zhang and Y.C. Yuan: Mechanical properties of a self-healing fibre reinforced epoxy composites, Composites Part B: Engineering, Volume 78, (2015), 515-519.

Q.T. Nguyen, T.D. Ngo, P Tran, P Mendis and D Bhattacharyya: Influences of Clay and Manufacturing on Fire Resistance of Organoclay/Thermoset Nanocomposites; Composites: Part A – Science and Manufacturing, Volume 74, (2015), 26-37.

O Das, A.K. Sarmah and D Bhattacharyya: A novel approach in organic waste utilization through biochar addition in wood/polypropylene composites; Waste Management, Volume 38, (2015), 132-140;

O Das, A.K. Sarmah and D Bhattacharyya: A sustainable and resilient approach through biochar addition in wood polymer composites; Science of Total Environment (STOTEN), Volume 512–513, (2015) ,326–336.

L Kimble, S Fakirov and D Bhattacharyya: Biodegradable microfibrillar polymer-polymer composites from poly(l-lactic acid)/poly(glycolic acid), Express Polymer Letters, Volume 9, Issue 3, (2015) 300-307.

W Wang, D Liu, Yanju Liu, J Leng and D Bhattacharyya: Electrical Actuation Properties of Reduced Graphene Oxide Paper /Epoxy-Based Shape Memory Composites, Composites Science and Technology, Volume 106, (2015), 20-24.

L Kimble and D Bhattacharyya: In Vitro Degradation Effects on Strength, Stiffness, and Creep of PLLA/PBS: A Potential Stent Material, International Journal of Polymeric Materials and Polymeric Biomaterials, Volume 64, Issue 6, (2015) 299-310.

N.K. Kim, R.J.T. Lin and D. Bhattacharyya: Effects of Wool Fibres, Ammonium Polyphosphate and Polymer Viscosity on the Flammability and Mechanical Performance of PP/Wool Composites, Polymer Degradation and Stability, Volume 119, (2015) 167-177.

R Shahmiri and R Das: Finite element analysis of an attachment of implant-assisted removable partial denture with different matrix design during bilateral loading, International Journal of Oral and Maxillofacial Implants, Volume 112, Issue 5, (2014), 1126–1133

M Battley, A Clark, T Allen and C Cameron: Shear strength of sandwich core materials subjected to loading rates relevant to water slamming, Journal of Reinforced Plastics and Composites, Volume 33, Issue 6, (2014), 506-513.

A Bilal, R.J.T Lin, and K Jayaraman: Optimisation of material compositions for flammability characteristics in rice husk/polyethylene composites, Journal of Reinforced Plastics and Composites, Volume 33, Issue 22, (2014), 2021-2033.

N.F.M. Rawi, K Jayaraman, and D Bhattacharyya: Bamboo fabric reinforced polypropylene and poly(lactic acid) for packaging applications: Impact, thermal, and physical properties, Polymer Composites, Volume 35, Issue 10, (2014), 1888-1899.

V Prapruddivongs, N Sombatsompop, and K Jayaraman: Effect of Organoclay Incorporation on Mechanical, Barrier and Thermal Properties and Anti-bacterial Performance of PLA and PLA Composites with Triclosan and Wood Flour, Polymers and Polymer Composites, Volume 22. Issue 7, (2014), 643-652.

A.U.R. Shah, D Lee, Y Wang, A Wasy, K.C. Ham, K Jayaraman and J Song: Effect of concentration of ATH on mechanical properties of polypropylene/aluminium trihydrate (PP/ATH) composite, Transactions of Nonferrous Metals Society of China (English Edition), Volume 24, Issue 1, (2014), 81-89.

I Ali, K Jayaraman, and D Bhattacharyya: Implications of fiber characteristics and mat densification on permeability, compaction and properties of kenaf fiber panels, Industrial Crops and Products, Volume 61, (2014), 293-302.

A Bilal, R.J.T. Lin, and K Jayaraman: Effects of fibre loading and interfacial modification on physical properties of rice husk /PE composites, Applied Mechanics and Materials, Volume 575, (2014).223-226.

L Yan, N Chouw, and K Jayaraman: On energy absorption capacity, flexural and dynamic properties of flax/epoxy composite tubes, Fibers and Polymers, Volume 15, Issue 6, (2014), 1270-1277.

L Yan, N Chouw, and K Jayaraman: Lateral crushing of empty and polyurethane-foam filled natural flax fabric reinforced epoxy composite tubes. Composites Part B: Engineering, Volume 63, (2014), 15-26.

S.M.R. Kazmi, R Das, and K Jayaraman: Sheet forming of flax reinforced polypropylene composites using vacuum assisted oven consolidation (VAOC), Journal of Materials Processing Technology, Volume 214, Issue 11, (2014), 2375-2386.

A Bilal, R.J.T. Lin, and K Jayaraman: Optimal formulation of rice husk reinforced polyethylene composites for mechanical performance: A mixture design approach, Journal of Applied Polymer Science, Volume 131, (2014), (16).

L Yan, N Chouw and K Jayaraman: Effect of column parameters on flax FRP confined coir fibre reinforced concrete, Construction and Building Materials, Volume 55, (2014)299-312.

L Yan, N Chouw and K Jayaraman: Effect of triggering and polyurethane foam-filler on axial crushing of natural flax/epoxy composite tubes, Materials and Design, Volume 56, (2014), 528-541.

Ali, I., K Jayaraman and D Bhattacharyya: Effects of resin and moisture content on the properties of medium density fibreboards made from kenaf bast fibres, Industrial Crops and Products, Volume 52, (2014), 191-198.

L Yan, N Chouw and K Jayaraman: Flax fibre and its composites - A review, Composites Part B: Engineering, Volume 56, (2014), 296-317.

J Schuster, Q Govignon and S Bickerton: Processability of Biobased Thermoset Resins and Flax Fibres Reinforcements Using Vacuum Assisted Resin Transfer Moulding, Open Journal of Composite Materials, Volume 4, (2014), 1-11.

S Comas-Cardona, B Cosson, S Bickerton and C Binetruy: An Optically-based Inverse Method to Measure In-plane Permeability Fields of Fibrous Reinforcements, Composites – Part A: Applied Science and Manufacturing Volume 57, (2014), 41-48.

T Bayerl, M Geith, A.A. Somashekar and D Bhattacharyya: Influence of Fibre Architecture on the Biodegradability of Flax/PLA Composites, International Biodeterioration and Biodegradation, Volume 96, (2014), 18-25.

N.K. Kim, R.J.T. Lin, D Bhattacharyya: Extruded short wool fibre composites: Mechanical and fire retardant properties, Composites Part B: Engineering, Volume 67, (2014), 472–480.

A.D.L Subasinghe and D Bhattacharyya: Performance of different intumescent ammonium polyphosphate flame retardants in PP/kenaf fibre composites, Composites Part A: Applied Science and Manufacturing, Volume 65, (2014), 91-99.

D Y Liu, G X Sui and D Bhattacharyya: Synthesis and characterisation of nanocellulose-based polyaniLine conducting films, Composites Science and Technology, Volume 99, (2014), 31–36.

S Fakirov, Z Rahman, P Poetschke and D Bhattacharyya: Single Polymer Composites of Poly(Butylene Terephthalate) Microfibrils Loaded with Carbon Nanotubes Exhibiting Electrical Conductivity and Improved Mechanical Properties, Macromolecular Materials Engineering, Volume 299, Issue 7, (2014), 799-806.

N Sallih, P Lescher, D Bhattacharyya: Factorial study of material and process parameters on the mechanical properties of extruded kenaf fibre/polypropylene composite sheets, Composites: Part A, Volume 61, (2014), 91–107.

S.T.C Lin, D Bhattacharyya, S Fakirov and J Cornish: Novel Organic Solvent Free Micro-/Nano-fibrillar, Nanoporous Scaffolds for Tissue Engineering, International Journal of Polymeric Materials and Polymeric Biomaterials, Volume 63, Issue 8, (2014), 416-423.

T Bayerl, M Duhovic, P Mitschang and D Bhattacharyya: The Heating of Polymer Composites by Electromagnetic Induction – A Review, Composites: Part A, Volume 57, (2014), 27–40.

S Lin, D Bhattacharyya, S Fakirov, B Matthews and J. Cornish: A Novel Microfibrillar Composite Approach towards Manufacturing Nanoporous Tissue Scaffolds, Mechanics of Advanced Materials and Structures, Vol. 21, Issue 03 (2014) 237 – 243.

N.K. Kim, R.J.T. Lin, Stoyko Fakirov, K Aw and D Bhattacharyya: Nanofibrillar Poly(vinylidene fluoride): Preparation and Functional Properties, International Journal of Polymeric Materials and Polymeric Biomaterials, Volume 63, Issue 1, (2014), 23-32.

N.K. Kim, R.J.T. Lin and D Bhattacharyya: Extruded Short Wool Fibre Composites: Mechanical and Fire Retardant Properties, Composites Part B: Engineering, Volume 67, (2014), 472–480.

A Bilal, Richard J. T. Lin and Krishnan Jayaraman. Optimal Formulation of Rice Husk Reinforced Polyethylene Composites for Mechanical Performance: A Mixture Design Approach, Journal of Applied Polymer Science, Volume 131, Issue 16, (2014), 40647, 10,

A.I. Azmi, R.J.T. Lin, D. Bhattacharyya: High-Speed Photographic Study of Chip Formation during End Milling of GFRP Composites, Advanced Materials Research, Volume 845, (2014), 919-915.

N.K. Kim, R.J.T. Lin, S Fakirov, K Aw and D Bhattacharyya: Nanofibrillar Poly(vinylidene fluoride): Preparation and Functional Properties, International Journal of Polymeric Materials and Polymeric Biomaterials, Volume 63, Issue 1, (2014) 23-32. 

I Stenius, A Rosén, M Battley and T Allen: Experimental hydroelastic characterization of slamming loaded marine panels, Ocean Engineering, Volume 74, (2013), 1-15.

N.F.M. Rawi, K Jayaraman, and D Bhattacharyya: A performance study on composites made from bamboo fabric and poly(lactic acid), Journal of Reinforced Plastics and Composites, Volume 32, Issue 20, (2013), 1513-1525.

A Bilal, R.J.T. Lin, and K Jayaraman: Analysis of the mechanical properties of rice husk reinforced polyethylene composites using experiments with mixtures, Advanced Materials Research, Volume 747, (2013), 395-398.

A.O.W Ern, T.C. Ming, and K Jayaraman: Density reduction and electrical conductivity induction in wood plastic composites, Advanced Materials Research, Volume 747, (2013).383-386.

I.A. Milne, R.N. Sharma, R.G.J. Flay and S Bickerton: Characteristics of the Turbulence in the Flow at a Tidal Stream Power Site, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, Volume 371, (2013), 1985.

T Huber, S Bickerton, J Mussig, S Pang and M.P. Staiger: Flexural and Impact Properties of All-cellulose Composite Laminates, Composites Science and Technology Volume 88, (2013), 92-98.

A Gupta, P.A. Kelly., S Ehrgott and S Bickerton: A Surrogate Model Based Evolutionary Game-theoretic Approach for Optimizing Non-isothermal Compression RTM Processes, Evolutionary Multi-Criterion Optimization Lecture Notes in Computer Science, Volume 7811, (2013), 615-627.

A Gupta, P.A. Kelly., S Ehrgott and S Bickerton: Applying Bi-level Multi-Objective Evolutionary Algorithms for Optimizing Composites Manufacturing Processes, Composites Science and Technology, Volume 84, (2013), 92-100.

W.A. Walbran, S Bickerton and P.A. Kelly: Evaluating the Shear Component of Reinforcement Compaction Stress during Liquid Composite Moulding Processes, Journal of Composite Materials Volume 47, Issue 5, (2013), 513-528.

Q Govignon, S Bickerton and P.A. Kelly: Experimental Investigation into the Post-filLing Stage of the Resin Infusion Process, Journal of Composite Materials, Volume 47, Issue 12, (2013), 1479-1492.

G Petrone, S Rao, S De Rosa, B R Mace, F Franco and D Bhattacharyya: Initial experimental investigations on natural fibre reinforced core panels, Composites: Part B, Volume 55, (2013), 400-406.

G Petrone, S Rao, S De Rosa, B R Mace, F Franco and D Bhattacharyya: Behaviour of fibre-reinforced honeycomb core under low velocity impact loading, Composite Structures, Volume 100, (2013,) 356-362.

N.F.M Rawi, K Jayaraman and D Bhattacharyya: A performance study on composites made from bamboo fabric and poly(lactic acid), Journal of Reinforced Plastics and Composites, Volume 32, Issue 20, (2013), 1513-1525.

S.M. Panamoottil, D Bhattacharyya and S Fakirov: Nanofibrillar polymer-polymer and single polymer composite involving poly(butylene terephthalate): Preparation and mechanical properties, Polymer-Plastics Technology and Engineering, Volume 52, Issue 11, (2013), 1106-1112.

S Rao, R Das and D Bhattacharyya: Investigation of bond strength and energy absorption capabilities in recyclable sandwich panels, Composites Part A: Applied Science and Manufacturing, Volume 45, (2013), 6-13.

S.M. Panamoottil, P Poetschke, R.J.T. Lin, D Bhattacharyya and S Fakirov: Conductivity of microfibrillar polymer-polymer composites with CNT-loaded microfibrils or compatibiliser, A comparative study; Express Polymer Letters, Volume 7, Issue 7, (2013) 607-620.

N Stribeck, A Zeinolebadi, S Fakirov, D Bhattacharyya and S Botta: Extruded blend films of poly(vinyl alcohol) and polyolefins: common and hard-elastic nanostructure evolution in the polyolefin during straining as monitored by SAXS, Science and Technology of Advanced Materials, Volume 14, Issue 3 (2013), 12.

V.V. Zuev, J Lee, S.V. Kostromin, S.V. Bronnikov and D Bhattacharyya: Statistical analysis of the self-heaLing epoxy-loaded microcapsules across their synthesis, Materials Letters, Volume 94, (2013), 79-82.

A.I. Azmi, R.J.T. Lin and D Bhattacharyya: Tool Wear Prediction Models during End MilLing of Glass Fibre-Reinforced Composites, International J of Advanced Manufacturing Technology, Volume 67, Issue 1-4, (2013) 701-718.

A.I. Azmi, R.J.T. Lin and D Bhattacharyya: Machinability Study of Glass Fibre-Reinforced Polymer Composites, International Journal of Advanced Manufacturing Technology, Volume 64, Issue 1-4, (2013), 247-261.

N.K. Kim, D. Bhattacharyya and R.J.T. Lin: Multi-Functional Properties of Wool Fibre Composites, Advanced Materials Research, Volume 747, (2013) 8-11.

S. M. Panamoottil, P Pötschke, R.J T. Lin, D Bhattacharyya, S Fakirov: Conductivity of microfibrillar polymer-polymer composites with CNT-loaded microfibrils or compatibilizer: A comparative study, Express Polymer Letters, Volume 7, Issue 7, (2013), 607–620.

A.I Azmi, R.J.T. Lin and D Bhattacharyya: Tool wear prediction models during end milLing of glass fibre-reinforced polymer composites. International Journal of Advanced Manufacturing Technology, Volume 67, (2013), 701-718.

A.I. Azmi, R.J.T. Lin and D. Bhattacharyya: Machinability Study of Glass Fibre-Reinforced Polymer Composites During End Milling, International Journal of Advanced Manufacturing Technology, Volume 64, (2013), 247-261.

A.I. Azmi, R.J.T. Lin and D. Bhattacharyya: Machinability Study of Glass Fibre-Reinforced Polymer Composites During End Milling, The International Journal of Advanced Manufacturing Technology, Volume 64, Issue 1, (2013):, 247–261 1-15

S Rao, K Jayaraman and D Bhattacharyya: Micro and macro analysis of sisal fibre composites hollow core sandwich panels, Composites Part B: Engineering, Volume 43, Issue 7, (2012), 2738–2745.

K Chaochanchaikul, K Jayaraman, V Rosarpitak and N Sombatsompop: Influence of lignin content on photodegradation in wood/HDPE composites under UV weathering, BioResources, Volume 7, Issue 1, (2012), 38-55.

J Lee, M Zhang, D Bhattacharyya, Y.C. Yuan, K Jayaraman and Y.W. MaI: Micromechanical behavior of self-heaLing epoxy and hardener-loaded microcapsules by nanoindentation, Materials Letters, Volume 76, (2012), 62-65

P Lescher, K Jayaraman, D Bhattacharyya: Characterization of water-free thermoplastic starch blends for manufacturing processes, Materials Science and Engineering- A, Volume532, (2012), 178-189, 2012.

A Gupta, P.A. Kelly, S Bickerton and W.A. Walbran: Simulating the effect of temperature elevation on clamping force requirements during rigid-tool Liquid Composite Moulding processes, Composites – Part A: Applied Science and Manufacturing, Volume 43, Issue 12, (2012), 2221-2229.

T Huber, S Bickerton, J Mussig, S Pang and M.P. Staiger: Solvent infusion processing of all-cellulose composite materials, Carbohydrate Polymers, Volume 90, Issue 1, (2012), 730-733.

M.W. Chai, S Bickerton, D Bhattacharyya and R Das: Influence of Natural Fibre Reinforcements on the Flammability of Bio-derived Composite Materials, Composites – Part B: Engineering, Volume 43, Issue 7, (2012), 2867-2874.

J.M. Gan, S Bickerton and M Battley: Quantifying Variability within Glass Fiber Reinforcements using an Automated Optical Method, Composites – Part A: Applied Science and Manufacturing, Volume 43, Issue 8, (2012), 1169-1176.

A.A Somashekar, S Bickerton and D Bhattacharyya: Modelling the Viscoelastic Stress Relaxation of Glass Fibre Reinforcements under Constant Compaction Strain during Composites Manufacturing, Composites – Part A: Applied Science and Manufacturing, Volume 43, Issue 7, (2012), 1044-1052.

J Timms, S Bickerton and P.A. Kelly: Laminate Thickness and Resin Pressure Evolution during Axisymmetric Liquid Composite Moulding with Flexible Tooling, Composites – Part A: Applied Science and Manufacturing, Volume 43, Issue 4, (2012), 621-630.

W.A. Walbran, B Verleye, S Bickerton and P.A. Kelly: Prediction and Experimental Verification of Normal Stress Distributions on Mould Tools during Liquid Composite Moulding, Composites – Part A: Applied Science and Manufacturing, Volume 43, Issue 1, (2012), 138-149.

T Huber, J Mussig, O Curnow, S Pang, S Bickerton and M.P Staiger: A Critical Review of All-cellulose Composites, Journal of Materials Science, Volume 47, Issue 3, (2012), 1171-1186.

J.J. Cheng, P.A. Kelly and S Bickerton: A Rate-Independent Thermomechanical Constitutive Model for Fiber Reinforcements, Journal of Composite Materials, Volume 46, Issue 2, (2012), 247-256.

M.W. Chai, S Bickerton, D Bhattacharyya and R Das: Influence of natural fibre composites on the flammability of bio-derived composite materials, Composites-B, Volume 43, Issue 7, (2012), 2867-2874.

A.I. Azmi, R.J.T. Lin and D Bhattacharyya: Experimental Study of GFRP Composites Machinability by End Milling, Material and Manufacturing Processes, Volume 27, (2012), 1045 – 1050.

Y Dong and D Bhattacharyya: Investigation on the competing effects of clay dispersion and matrix plasticisation for polypropylene/clay nanocomposites. Part II: crystalLine structure and thermo-mechanical behaviour, Journal of Materials Science, Volume 47, (2012), 4127-4137.

Y Dong and D Bhattacharyya: Investigation on the competing effects of clay dispersion and matrix plasticisation for polypropylene/clay nanocomposites. Part I: morphology and mechanical properties, Journal of Materials Science, Volume 47, (2012), 3900-3912.

J Lee, D Bhattacharyya, K Jayaraman: Micromechanical behavior of self-heaLing epoxy and hardener-loaded microcapsules by Nanoindentation, Materials Letters, Volume 76, (2012), 62-65.

A.A. Somashekar, S Bickerton and D Bhattacharyya: (2012). Modelling the viscoelastic stress relaxation of glass fibre reinforcements under constant compaction strain during composites manufacturing, Composites Part A: Applied Science and Manufacturing, Volume 43, Issue 7, (2012), 1044-1052.

J Lu, A.J. Easteal, D Bhattacharyya, N.R. Edmonds and C Bolt: Rheokinetics of crossLinkable poly(vinyl acetate) emulsion and diethylene triamine, Journal of Applied Polymer Science, Volume 126, Supplement 2, (2012), 396-402.

P Lescher, K Jayaraman and D Bhattacharyya: Characterization of water-free thermoplastic starch blends for manufacturing processes, Materials Science and Engineering: A, Volume 532, (2012) 178-189.

D Liu, X Yuan and D Bhattacharyya: The effects of cellulose nanowhiskers on electrospun poly (lactic acid) nanofibres, Journal of Materials Science, Volume 47, Issue 7, (2012), 3159-3165.

S Rao, K Jayaraman and D Bhattacharyya: Micro and macro analysis of sisal fibre composites hollow core sandwich panels, Composite Part B: Engineering, Volume 43, Issue 7, (2012), 2738-2745.

S Rao, B Coombs and D Bhattacharyya: Kenaf MDF Panels: A statistical approach in parameter selection, International Wood Products Journal, Volume 3, Issue 1, (2012)m 15-20.

R McCardle, D Bhattacharyya and S Fakirov: Effect of reinforcement orientation on the mechanical properties of microfibrillar PP/PET and PET single polymer composites, Macromolecular Materials Engineering, Volume 297, (2012), 711-723 .

S Rao, A Bhardwaj, A Beehag and D Bhattacharyya: Fire performance of flax laminates and their hybrids, Advanced Materials Research Volume 410, (2012), 114-117.

M-L Lau, K-t Lau, H Ku, D Bhattacharyya and J-H Lee: Assessing heat-treatment effects on bovine cortical bones by Nanoindentation, Advanced Materials Research, Volume 410, (2012), 110-113.

S Rao, D Liu, P Jaiswal, S Ray and D Bhattacharyya: Electrospun nanofibre cores containing graphene oxide for sandwich films: manufacturing and analysis, Advanced Materials Research Volume 410, (2012), 26-30.

A.I Azmi, R.J.T. Lin, D Bhattacharyya: Experimental study of machinability of GFRP composites by end milling, Materials and Manufacturing Processes, Volume 27, Issue 10, (2012), 1045-1050.

A.P. Penneru, R.J.T. Lin, P Antcliff and H Choi: Development and Characterisation of Lightweight Sandwich Panel for Table Tennis Table. Advanced Materials Research, 410, (2012), 353-356.

A.A Somashekar, S Bickerton and D Bhattacharyya: Modelling the viscoelastic stress relaxation of glass fibre reinforcements under constant compaction strain during composites manufacturing, Composites Part A: Applied Science and Manufacturing, Volume 43, Issue 7, (2012), 1044-1052.

T Allen and M Battley. Characterisation of fluid-structure interaction for water impact of composite panels. The International Journal of Multiphysics, Volume 6, Issue 3, (2012), 283-304.

T Allen and M Battley: Servo-hydraulic System for Controlled Velocity Water Impact of Marine Sandwich Panels, Experimental Mechanics, Volume 52, Issue 1, (2012), 95-106. 

S Rao, K Jayaraman and D Bhattacharyya: Short fibre reinforced cores and their sandwich panels: Processing and evaluation, Composites Part A: Applied Science and Manufacturing, Volume 42, Issue 9, (2011), 1236-1246.

F Bensadoun, N Kchit, C Billotte, S Bickerton, F Trochu and E Ruiz: A Study of Nanoclay Reinforcement of Biocomposites Made by Liquid Composite Molding, International Journal of Polymer Science, Volume 2011, (2011).

P.A. Kelly, S Bickerton and J Cheng: Transverse Compression Properties of Textile Materials, Advanced Materials Research Volume 332-334, (2011), 697-701.

X Yuan, S Bickerton, S Bradley, A Tapiheroe and J Little: The Influence of Processing Parameters on the Void Content and Compressive Strength of Carbon Fibre-epoxy Laminates, Advanced Materials Research, Volume 275, (2011), 243-246.

R Umer, S Bickerton and A Fernyhough: The effect of yarn length and diameter on permeability and compaction response of flax fibre mats, Composites – Part A: Applied Science and Manufacturing Volume 42, Issue 7, (2011), 723-732.

B Verleye, W.A Walbran, S Bickerton and P.A. Kelly: Simulation and Experimental Validation of Force Controlled Compression Resin Transfer Moulding, Journal of Composite Materials, Volume 45, Issue 7, (2011), 815-829.

A.A Somashekar, S Bickerton and D Bhattacharyya: Compression deformation of a biaxial stitched glass fibre reinforcement: Visualisation and image analysis using X-ray micro-CT, Composites – Part A: Applied Science and Manufacturing, Volume 42, Issue 2, (2011), 140-150.

S Banerjee and D Bhattacharyya: Optimal design of sandwich panels made of wood veneer hollow cores, Composites Science and Technology, Volume 71, Issue 4 (2011), 425-432.

S Rao, K Jayaraman and D Bhattacharyya: Short fibre reinforced cores and their sandwich panels: processing and evaluation, Composites: Part A, Applied Science and Manufacturing, Volume 42, Issue 9, (2011), 140-150.

Mei Ho, K-T Lau, H Wang and D Bhattacharyya: Characteristics of a silk fibre reinforced biodegradable plastic, Composites Part B: Engineering, Volume 42, Issue 2, (2011) 117-122.

J Lee, D Bhattacharyya, M.Q. Zhang, Y.C. Yuan: Fracture behaviour of a self-heaLing microcapsule-loaded epoxy system, Express Polymer Letters, Volume 5, Issue 3, (2011), 246-253.

A.A. Somashekar, S Bickerton and D Bhattacharyya: Compression deformation of a biaxial stitched glass fibre reinforcement: visualisation and image analysis using x-ray micro-CT, Composites: Part A, Applied Science and Manufacturing, Volume 42, Issue 2, (2011), 140-150.

A.I. Azmi, R.J.T. Lin and D. Bhattacharyya: Fuzzy Logic Predictive Model of Tool Wear in End Milling Glass Fibre Reinforced Composites, Advanced Materials Research, Volume 214, (2011), 329-333.

A.I. Azmi, R.J.T. Lin and D. Bhattacharyya: Parametric Study of End Milling Glass Fibre Reinforced Composites, American Institute of Physics, Volume 1315, (2011), 1083-1088.

A.A Somashekar: Teaching material behaviour to undergraduate mechanical engineering students: a personal viewpoint, International Journal of Mechanical Engineering Education, Volume 39, Issue 4, (2011), 351-352.

A.A Somashekar, S Bickerton and D Bhattacharyya: Compression deformation of a biaxial stitched glass fibre reinforcement: visualisation and image analysis using x-ray micro-CT, Composites Part A: Applied Science and Manufacturing, Volume 42, Issue 2, (2011), 140-150.

Y Dong and D Bhattacharyya: Mapping the real micro/nanostructures for the prediction of elastic moduli of polypropylene/clay nanocomposites; Polymer, Vol. 51 (2010) 816-824.    

S Banerjee, M Battley and D Bhattacharyya: Shear strength optimisation of reinforced honeycomb core materials; Mechanics of Advanced Materials and Structures, Vol. 17, Issue 7 (2010) 542-552.

Y Dong and D Bhattacharyya: A simple micromechanical approach to predict mechanical behaviour of polypropylene/organoclay nanocomposites based on representative volume element (RVE); Journal of Computational Materials Science, Vol. 49 (2010) 1-8.

Yu Dong and D Bhattacharyya: Morphological-image analysis based numerical modelling of organoclay filled nanocomposites; Mechanics of Advanced Materials and Structures, Vol. 17, Issue 7 (2010) 534-541.

D Y Liu, X W Yuan, D Bhattacharyya and A J Easteal: Preparation and Characterization of Poly(lactic acid) – based Cellulose Biocomposites; Express Polymer Letters (in press). [DOI: 10.3144/expresspolymlett.2010].

Yu Dong and D Bhattacharyya: Dual Role of Maleated Polypropylene in Processing and Material Characterisation of Polypropylene /Clay Nanocomposites; J. of Materials Science & Engineering A, Vol. 527 (2010), 1617-1622.

Y Wang, V Yadama, M-P Laborie and D Bhattacharyya: Cure kinetics of PF/PVAc hybrid adhesive for manufacturing profiled wood-strand composites; Holzforschung, Vol. 64 (2010) 603-608.

S Rao, D Bhattacharyya, K Jayaraman and A Fernyhough: Manufacturing and recycling of sisal-polypropylene composites; Polymers & Polymer Composites, Vol. 17, No. 8 (2009) 467-479.

D Bhattacharyya, P Maitrot and S Fakirov: Polyamide 6 single polymer composites; Express Polymer Letters, Vol 3, No. 8 (2009) 525-532.

P E Lescher, K Jayaraman and D Bhattacharyya: Water-Free Blending of Thermoplastic Starch and Polyethylene for Rotomoulding; Starch-Starke, Vol. 61 (2009) 43-45.

M Z Abdullah, S Bickerton, D Bhattacharyya, R J Crawford, E Harkin-Jones: Rotational Molding Cycle Time Reduction using a Combination of Physical Techniques; Polymer Engineering and Science, Vol 49, Issue 9 (2009) 1846-1854.

C C Yang, M Duhovic, R J T Lin and D Bhattacharyya: Finite element modelling and analysis of composites toecaps; Institute of Physics Series: Mater. Sci. Eng., Vol 4 (2009) 012010, 6pp.   (doi: 10.1088/1757-899X/4/1/012010).

P S Tan, M Q Zhang and D Bhattacharyya: Processing and performance of self-healing materials; Institute of Physics Series: Mater. Sci. Eng., Vol 4 (2009) 012017, 5pp.   (doi: 10.1088/1757-899X/4/1/012017).

S N Patra, D Bhattacharyya, S Ray and A J Easteal: Electrospun poly(lactic acid) based conducting nanofibrous networks; Institute of Physics Series: Mater. Sci. Eng., Vol 4 (2009) 012020, 6pp.   (doi: 10.1088/1757-899X/4/1/012020).

M Z Abdullah, R J T Lin, K Pe and D Bhattacharyya: Effects of Peak Internal Air Temperature on Mechanical Properties; RotoWorld, Vol 5(2) (2009) 60-63.

M Duhovic, S Horbach and D Bhattacharyya: Improving the Interface Strength in Flax Fibre Poly(lactic) Acid Composites; J. Biobased Materials and Bioenergy, Vol. 3, No. 2 (2009) 188-198.

J Lee, A J Easteal, U Pal and D Bhattacharyya: Evolution of ZnO nanostructures in sol–gel synthesis; Current Applied Physics, Vol. 9, Issue 4 (2009) 792-796.

A P Penneru, D Bhattacharyya and K Jayaraman: Forming Limits for the Bulk Forming of Solid Wood; Holzforschung, Vol. 63 (2009) 479-481.

S N Patra, A J Easteal and D Bhattacharyya: Parametric study of manufacturing Poly(lactic) acid nanofibrous mat by electrspinning;  J. of Materials Science, Vol. 44, No. 2 (2009) 647-654.

R J Lin, S A Du Preez, J H Slaats and D Bhattacharyya: Improvement on the Efficiency of Drawing during the Production of Microfibrillar Composites; Advanced Materials Research, Vol. 79-82 (2009) 1887-1890.

Yu Dong and Debes Bhattacharyya: Effects of clay type, clay/compatibiliser content and matrix viscosity on the mechanical properties of polypropylene/organoclay nanocomposites; Composites – A: Applied Science and Manufacturing, Vol. 39 (2008) 1177-1191.

Narayana Srinivasan,  Krishnan Jayaraman, Debes Bhattacharyya: Profile production in multi-veneer sheets by continuous roll forming; Holzforschung, Vol. 62, No. 4 (2008) 453-460.

R J Shields, D Bhattacharyya and S Fakirov: Fibrillar polymer-polymer composites: morphology, properties and applications; J. of Materials Science, Vol. 43 (2008) 6758-6770.

Y. Dong, D. Bhattacharyya, P. J. Hunter: Experimental characterisation and object-oriented finite element modelling of polypropylene/organoclay nanocomposites; Composites Science and Technology, Vol. 68 (2008) 2864-2875.

 K L Leung, A J Easteal and D Bhattacharyya: In-situ formation of PEN microfibrils in polyethylene and polypropylene during extrusion; Composites – A: Applied Science and Manufacturing, Vol. 39 (2008) 662-676.

Xiaowen Yuan, Allan J Easteal and Debes Bhattacharyya: Influence of surface treatment on hybrid wollasonite-polyethylene composite resins for rotational moulding; J. of Materials Science, Vol. 43 (2008) 6057-6063.

D Bhattacharyya, R J Shields, S Fakirov: Characterisation and novel applications of fibrillar polymer composites; Adv. Mater. Res., Vol. 47-50 (2008) 1278-1281.

S Banerjee, W Yan. and D Bhattacharyya: Modelling of heat transfer in Rotational Moulding; Polymer Engineering and Science, Vol. 48, No. 11 (2008) 2188-2197.

S Fakirov, D Bhattacharyya, R J Shields: Nanofibril reinforced composites from polymer blends; Colloids and Surfaces A:  Physicochem. Engineering Aspects, Vol. 313 (2008) 2-8.

S Fakirov, C. Fuchs, D Bhattacharyya and K Friedrich: Polyolefin/PET microplates reinforced composites with improved barrier properties; Int. J. Polym. Mater, Vol.57, Issue#1 (2008) 33-53.

R J Shields, D Bhattacharyya and S Fakirov: Oxygen permeability analysis of microfibril reinforced composites from PE/PET blends; Composites – A: Applied Science  & Manufacturing, Vol. 39, Issue 6 (2008) 940-949.

J Lee, D Bhattacharyya, A. J Easteal and J B Metson: Properties of nano-ZnO/poly(vinyl alcohol) /poly(ethylene oxide) composite thin films; Current Applied Physics, Vol. 8 (2008) 42-47.